Oak Live Edge Shelf – SH-003

The attractive grain is a defining feature of this individual
piece. Its generous proportions make it an option for a
longer display shelf, while the natural edge brings character
to the finished outline. Keep the supplied length or trim
the board to suit your available space.

Distinctive Grain & Solid Wood Character

The grain gives this shelf its individual appearance.
Consider the visible face and natural edge together when
choosing its orientation. Positioning the board in your
intended space before installation helps you decide which
details you want to emphasize in the finished layout.

At approximately 10 inches wide, the board offers useful
depth for objects whose bases fit comfortably on the
surface. Check the dimensions of books, picture frames,
or decorative pieces before planning their arrangement.
The mounting system must also suit their combined weight.

A Prepared Oak Live Edge Shelf

Drying, flattening, sanding, and coating have already
been completed. You are starting with a prepared wood
surface, allowing you to concentrate on final sizing
and installation. The shelf is supplied as a finished
board rather than a complete wall-mounted assembly.

The existing coating highlights the wood’s appearance,
but its exact type is not specified here. Confirm
the coating before choosing cleaning products, applying
another finish, or touching up a newly cut end.
Compatibility matters when making changes to a finished surface.

Planning the Final Size

Check the supplied 53.5-inch length against your wall
space and furniture layout. If the full size fits,
you can preserve the existing ends. If you need
a shorter shelf, plan the cut before drilling
mounting holes or choosing the final support positions.

Natural contours can change the usable depth along
a live edge board. Check the actual piece where
each object will sit. The approximately 10-inch
width is a sizing guide, rather than a promise
of identical depth at every point along the edge.

The 2⅛-inch thickness gives the shelf a substantial
visual profile. It also needs to be considered
when selecting hardware and drilling equipment.
Confirm the requirements of your chosen supports
using the finished board’s actual dimensions.

Trimming to Fit Your Space

The board can be cut shorter for a custom
installation. Measure carefully and allow for
the saw cut before marking the final length.
Support the piece securely and use woodworking
equipment appropriate to the material and required cut.

Cutting exposes wood without the existing coating.
Smooth the new end and apply a compatible
finish as appropriate. Test the touch-up product
on an offcut or less visible area to check
its color and sheen before treating the visible end.

Reducing the width can remove part of the
natural edge and change the shelf’s character.
Consider that effect before cutting. Any newly
exposed surface will require suitable preparation
and finishing before the completed piece is installed.

Mounting Your Oak Live Edge Shelf

Choose supports for the finished dimensions,
wall construction, and intended load. Concealed
brackets may require specific hole sizes,
drilling depths, and mounting positions.
Check those requirements before modifying the board.

Do not assume that the shelf is already
drilled for a particular system. Use the
actual hardware and its instructions to
plan holes and support spacing. Check
that fasteners engage sound wood and that
wall fixings suit the installation surface.

Care & Surface Protection

Dust with a soft cloth and avoid abrasive
cleaning pads. Follow care guidance appropriate
to the existing coating. Wipe up spills
promptly and protect the surface from
prolonged moisture and excessive heat.

More from Riverstone Wood

Visit
Riverstone Wood
to explore our wood collections.
Reference SH-003 when asking about this
oak live edge shelf, its coating,
or dimensions for your project.